[box] Look at my: Painted MDF Countertop post for pictures of what this could look like painted and for instructions on how to edge this countertop with a solid wood strip. The following instructions are to provide information on dealing with seams when you have a REALLY long or extra large countertop that one piece of MDF will not cover.[/box]
I started building out my workshop sometime during my Executive Master Closet build (even though I’ve promised myself and Wes that I will only work in one room at a time in this house!) I was waiting for hardware or paint to dry or something and I was motivated to make progress SOMEWHERE so I started this room.
(I got to this point before I rerouted focus onto the closet. Now the closet is mostly done and I NEED to finish this room so I can be more organized and hopefully find the rest of my tools and put crap away…before I tackle my next BIG project in the house!)
First thing to finish up in here was a countertop. I decided the cheapest, flattest, sturdiest, easiest and fastest countertop surface would be MDF.
MDF is a really common work surface in a workshop for all the reasons I just mentioned. The problem with MDF, is that it’s not that attractive in the nude!
Plus, my countertop is just under 11′ long so there was no way to avoid having a seam! I thought I would be – but it turns out I’m just not OK that!
So I ended up doing a whole bunch of work making this MDF countertop perfectly sturdy, straight and smooth… and then ended up covering it up with something else but I’m going to walk you through the MDF process because if a person wanted a cheap, easy, fast, sturdy, attractive countertop for a space like, let’s say a craft room, this could be painted and top-coated.
**Like anything, there are a gazillion and ten ways to do anything, this is how I DID it. Feel free to modify, add your own twist, improve and expound upon in any way you choose!
You will want two layers of MDF (Glued together) to make it strong and sturdy!
*If you don’t have the power tools yourself, have the Home Improvement store cut your wood to size. I DO have the tools but sometimes have Home Depot cut my wood down so it’s easier for me to carry. (This is one of those times.) Don’t expect those cuts to be perfect, it’s hit or miss, but a good option if you don’t have any other way to cut wood.
If you have a surface that is larger than a sheet of MDF will reach, make sure your seams are supported over a cabinet, but don’t have them meet exactly in the middle because you want to stagger your seams.
Lay down your first “layer” of MDF and use clamps, prybars or whatever means you can to pull the seam together as tightly as possible. Then pound some wood brackets into it to hold it together.
Turn the entire thing over so the brackets are on the bottom and drizzle glue all over. It’s probably a good idea to spread it out but I just slapped the next layer on.
(I don’t care if the entire surface is melded together. This is certainly adequate for holding the two pieces firmly together and keeping the seams tight FOREVER!)
Lay down your next pieces and remember to stagger your seams. I used shims to push the two top pieces together so the seam was a tight as it could possibly be! (You could totally nail the two pieces together at this point if you want.)
I used as many clamps and heavy objects I could find to smoosh the top layer down onto the first layer while the glue set up. (Time depends on the type of glue YOU are using. I use Titebond original and it’s completely good to go in a couple hours.)
Now you just have to sand your seam. (I used a little wood filler too.) Be sure when you are sanding not to go over and over JUST the seam area because you want to maintain a level surface. It’s easy to sand away a little channel if you’re not careful!
Before you attach your countertop, make sure it’s level. A long level is the best for long surfaces.
Use shims one one side if it’s not level and then simply drive screws through the cabinet into the countertop. Just make sure they are not TOO long! 😀
(For the edge, you can either sand it REALLY well, or add a piece of solid wood. (More on adding wood edging on this Painted MDF Countertop post.)
There are many ways to finish off your countertop.
You could wax it, (which I was planning on doing for the workshop originally)
Paint it and add a good top coat (as in the other post I mentioned above).
Cover it with paper or fabric and mod podge.
Cover it with something interesting (like the now overdone penny) and epoxy.
Insert your own creative idea here:
[box] I’ve been asked if you could do a painted countertop in a Kitchen. I personally would NOT. But, I suppose you could if you used a food safe, water resistant top coat and made sure you never set a hot pan on it or cut directly on it… Craft room, workshop, even Laundry room or bathroom if you used a Marine type paint (can be submerged in water and will not get damaged) but not a kitchen. In my opinion! [/box]
In my workshop, I know my countertop is going to take more of a beating than most countertops do, so I’m using the MDF as a sturdy base and am creating a distressed wood slab – looking countertop.
If I do say so myself, It’s looking GOOD and I’m excited to share!
Hint: I’m finishing with Tung Oil and that process just cannot be rushed!
Have a SUPER weekend and remember to have some fun. Life is not the “all DIY all the time” channel! 😀