My dining room ceiling is DONE and I’m so excited about it! I’ve been sharing lots of updates as this ceiling has come together and a lot of you have asked for instructions on how to build a box-beam ceiling. This is the same technique used on all three of my box-beam ceilings (if you remember the kitchen and living room updates too).
This room had a coffered ceiling that I had to work with. We have 9′ ceilings on the main floor and the recesses area in this ceiling extends above that 9′ so we had a lot to work with here. Since this room is small and separate from the other rooms I thought it would be the perfect place to do something a little different. I wanted an X in the center of the existing “frame”.
Of course you know me and my luuuuurve of the texture in my house so I purchased a few sheets of 1/4″ plywood to cover up the coffer so it would appear to be a beam, similar to what we were adding. The coffer is wider and deeper than the new beams which is ok, it will just look like a frame to my X. It will look intentional in the end. The 1/4″ plywood went up with construction adhesive and nails.
Next, I had the guys cover the rest of the ceiling with beadboard to hide the rest of the ugly texture —which I loatheth! I don’t want to skim coat ceilings and I love decorative ceilings so it’s a great excuse for me to use a whole bunch of creative juice!
Now, to create the faux beams, 2×6 were installed as a base. Then 1×6 were nailed to the 2×6 to create the “beam” sides.
After all the sides are in the “beams” get blocked with pieces of 2×6. The blocks are located at the bottom of the beam (flush with the bottom of the sides). They are nailed in place and spaced about 16″ apart.
*Put a small pencil mark on the sides to mark the location of these blocks for future use.
The purpose of the blocks are to keep the sides square with the base (since it is the same thickness as the base) and to provide something to secure the bottom of the beam to. The bottom is a 1×8. It is nailed to the 2×6 blocks. Those pencil marks will come in handy now! The 1×8 should be 1/2″ wider than the box so overhang 1/4″ on each side.
All the nail holes, seams and dings are filled. My guys used the patch and paint spackly stuff. After I sanded everything, I went back over the areas that needed special attention and used wood filler on those.
Then I primed with a shellac primer. I primed with a roller because I do not like to use anything but water based paints in a paint sprayer. Just my personal preference. Then I painted the box beam and coffer white (with my paint sprayer).
I wanted two paint colors in this room — because remember this is my “go crazy and throw caution to the wind” room. I carefully taped off the area I wanted to remain white.
It was a bit of work. Just a tiny bit. Seriously, not too bad. Promise…
Then I painted my second color. After that was all dry I took off my tape and plastic. I had some trepidation because I was SURE I was going to find areas where the sprayer got through my barricade but I was wrong. I used the Scotch edge seal painters tape and it worked awesome!
Look at that line! What can I say? I’m easy to entertain.
And there you have it. Every time I walk by that room I sneak a look and it makes me smile…really big!
Aine says
This is beautiful! I wish I had tall ceilings to work with so I could do this!
Laura M says
Gorgeous. The angles are intimidating!
Elizabeth says
Very beautiful!
JaCkie says
This may be my favorite thing you’ve done so far! I think it’s the perfect look for that space!
Cindy says
It looks fantastic. If i were doing that myself I think I would freak out about all of the angles. Maybe it’s easier than it looks. Great job!!! Oh, and I love the two colors.
P.S. thanks for giving me the balls to tackle some projects I wouldn’t have taken on (built in bookcases next to my fireplace) but I figured if you can do it, so can I!!!