I’m building counter-tops for the laundry room by gluing up 2x6s. This is inexpensive material that I can finish into a beautiful wood countertop.
DIY Wood Countertops
I cut the edges off each 2×6 so they all had sharp edges. I don’t want these rounded –beveled edges on my countertop.
This process involves a LOT of glue!
And then a whole bunch of clamps.
I’m glueing up 2 at a time, then glueing up those pairs. I don’t want to try to keep track of all the boards in one glue up.
Check out some of my other countertop ideas:
Sandra says
I clean it off and use it for frosting too. LOL (JK)
Sandra says
Nope. 😉
Sandra says
My main concern is not the seams, it is keeping the planks flat. And my wood is neither dry nor seasoned. I’m in trouble. LOL
Sandra says
The boards underneath just raised the planks off the table so I could get my clamps on. I clamped the boards across the top to keep the planks flat and level. I know I should have created some cauls but I didn’t want to spend time on that.
Sandra says
I don’t understand the question. 🙂