She built these two tower cabinets to fill the wall around an existing changing table which makes the whole wall feel like a custom shelving unit.
Take it away, Jaime!
Lily’s new shelves.
I gave myself a real challenge to build these tower shelves (in a custom size and layout) just to see if I could do it and I think it’s safe to say judging from the picture that I can.
So that picture above was slightly altered, here’s the real deal:
And a before shot when there were no tower shelves:
The story is my sister-in-law B and her husband P have a new baby, Lily, in a one bedroom apartment in NYC and although there is plenty of space, it was the use of the space that got me going. And of course all the inspiring pictures of other things people had made on Ana White’s blog which made me think I could make something great too.
On a recent visit (and my first visit to their place) I saw the layout and my mind got working. Thank goodness I travel with my tape measure (that’s normal right Mom and Megan?), I measured up the space and made some drawings. You know something like this from PBKids but lets not pay $1400 for it – who wants to do that? And we needed to make some hanging space.
image from Pottery Barn kids
So I combined a few ideas from Ana – the 5 cube tower bookcase
and the doors from the nursery armoire
- and adjusted it all to fit the measurements.I wanted to make the most use of the space so I started with 18″ x 18″ x 82″high and worked my way backwards. Which by the way is a tiny bit difficult because of the thickness of wood (nominal versus actual size) but slowly I got it. And actually 18″ is great for depth, anything deeper and stuff just gets lost back there.
I started with 2 plywood sheets (4′x8′) ($14 each) and had the guys at Home Depot cut them down to manageable size but I wanted to make use of the entire sheet – no scraps.
These are the cuts I had Orange guy make:
1- 16″ x 48″
3 – 16″ x 80″ (although one came out at 15 1/2″ – nominal size thing again – but that was okay because I used that for the actual shelf pieces)
I also bought 10 (1′x2′x8′) #2 pine boards ($3 each) and 2 (2′x4′x1/2″) sheets ($33 each) for the doors. I had the beadboard for the backing from another project and I had 1/4″ for the door stiles from the kitchen renovation. I also had the closet rod leftover from previous owners in the basement.
For hardware I bought 1 box (50) 2″ (#8) wood screws ($5) , 6 hinges ($7), 2 sets closet rod assembly kits ($5), 2 wooden knobs ($2), and 2 door magnets ($3). I had 2″ finish nails, 1 1/4″ brad nails and 5/8″ brad nails.
So in all I only spent $186. And that includes the (4) pink woven bins ($10 each at Homegoods) which I did buy prior to constructing the shelves because again I wanted to make the most use of each shelf with no wasted space so I needed the height of the bins in order to determine the shelf height. Good thing I did because I was able to make four shelves instead of just three.
Here’s some progress photos:
The shelves are complete without doors or hanging rod:
Here you can see the 18″ depth and clearly they are made of plywood and lots and lots of wood putty covering those screws:
And here are the bins I bought prior to constructing the shelves, without them I would not have know how high to make each shelf to make the most of our 80″ high piece:
Primed and painted (semi-gloss white which I had), doors and knobs on:
Close up of door:
And behind the door we have the hanging space:
And now we are loaded in the minivan for our delivery to NYC:
All in place in their new home ready for Lily to fill up:
A closer look:
One last side by side:
And for some real decorating fun:
By far my largest and most time consuming project but not too difficult. Lily now has much more storage and hanging space that was designed to fit and make the best use of the space we had. And all for a fraction of the retail price (pretty sure PBkids would charge about $750 for the towers, I paid under $200 for supplies). I would definitely do it again, so where do we need furniture in our house? I can probably think of a few things to make.
Fantastic Build Jaime! Thanks for sharing.
Tags: guest posts